3/1/12

Hot Deals PIXEL KING E-TTL II Wireless Flash Trigger for CANON

PIXEL KING E-TTL II Wireless Flash Trigger for CANON for Sale - Review & Buy at Cheap Price


List Price : $209.99


Price : $126.90




PIXEL KING E-TTL II Wireless Flash Trigger for CANON Feature | Sale - Review & Buy at Cheap Price

  • The item must use with the "Transmitter" together. The King is a second generation system, with the TTL-control based upon the Knight first released in 2009. Like the Pixel Knight, it does not support the Canon wireless protocol(eg:it can not work as ST-E2 to trigger 430EX flash in remote mode), but works by making the remote flash "think" it is in the camera's hot-shoe. The body is similar to the Pixel Bishop. It uses the 2.4 GHz frequency (unregulated worldwide), and Pixel indicates that has a reach of around 100 meters. Pixel King pair (receiver and transmitter). Photo: Pixel. The King provides 7 selectable channels and 3 different groups. For power, both the TX and RX use two AA-sized batteries. Both the TX and RX have an USB-socket to allow firmware updates. Both the TX and RX have a hot-shoe. The RX hot-shoe is for mounting remote Speedlites. However, the TX hot-shoe is not a TTL pass-through shoe, and can not be used to mount an additional Speedlite. Instead Pixel has hinted that they may later introduce a separate control unit (dubbed "N-ETTL") that can be mounted in the TX hot-shoe and used like the PocketWizard AC3 Zone Controller.
  • May trigger both Canon Speedlites and generic studio strobes. Compatible with Canon E-TTL II for automatic power control. May control up to 3 different groups (7 combinations). May be set to one of 7 different channels. Wireless E-TTL II control from camera position of EX II flash units with a compatible Canon DSLR. When using EX II flash units, you can also adjust the manual power ratio, FEC and zoom head on remote Speedlites with a compatible Canon DSLR. Maximum sync. speed is 1/250 second unless using high-speed sync. mode. High-speed sync., up to 1/8000 second, for EX II flash units connected through the RX hot-shoe. High-speed sync., up to 1/8000 second, for studio strobes connected through the RX pc-socket. USB interface for firmware updates. Can also be used for 5 volts DC power supply. It does not support the Multi stroboscopic mode. For wireless E-TTL II, the flash in the RX hot-shoe must be E-TTL II compatible. Compatible Canon Speedlites are: 580EX II, 430EX II, 320EX, 270EX II. The manual also says that Canon E-TTL II compatible units from third party manufacturers Metz, Sigma, Sunpak and Nissin (no specific models listed) may work. The TX has very sparse controls. To set it up you use the camera's external flash func. setting-menu. The following Canon EOS bodies are listed as compatible: 450D, 500D, 550D, 600D, 40D, 50D, 60D, 7D, 5D II, 1D III, 1D IV, 1Ds III. Older Canon DSLRs does not let you control the flash from the camera menu, and compatibility is limited to selecting channel and group on TX. It will then "dumb down" and operate like a wireless grouping flash trigger such as the Pixel Bishop.
  • Features: (1) Support Canon E-TTL. (2) Up to 3 difference group and 7 combination on the flash transceiver. (3) Support EOS E-TTL II. (4) When using the EOS EX II series flash, you can set difference setting on difference group, available to set 1/1~1/128 flash output, totally 23 difference levels. (5) When using EOS EX II series flash, you can adjust the flash exposure compensation from camera. (6) Support all the shutter speed, sync speed up to 1/8000s;using the PC socket control the studio ight which also support 1/8000s sync speed. (7) Multi control the speedlite or studio light.
  • Function: (1) Support camera menu control flash output power. (2) Support camera menu Settings flash output mode. (3) Support exposure compensation. (4) Support ae lock. (5) Support camera Settings grouping. (6) Support three flash group of output different power flash. (7) Support manual transmitters setting on grouping flash. (8) Support the former shade synchronization, high-speed synchronization. (9) Support high-speed synchronous shadow room lights. (10) Support other brands compatible with flash high-speed synchronization and TTL flash (Metz,SIGMA,Sunpak,Nissin). (11) Support other brands compatible with flash high-speed synchronization and TTL flash (May not support the high-speed synchronization and TTL flash). (12) Support update equipment program. (13) Support a launcher control multiple receptors work. (14) Support flash focusing lights work. (15) Don't support three flash modes such as output different group - TTL and M model E while flash. (16) Don't support multiple stroboscopic. (17) Don't support. After shade synchronous. (18) Don't support Canon wireless flash system. (19) Don't support surrounded exposure. (20) Don't support through the camera menu control EX series flash output model and parameters.
  • (1)King receiver compatible with: Canon EOS 580EX II, 580EX, 430EX II, 430EX, 320EX II, 270EX II, 220EX II Flash, Metz flash, Sigma flash, Sunpak flash, Nissin flash, Studio and outdoor flash. (2)Support external flash control in camera menu: CANON EOS 600D,1100D, 550D, 500D, 450D, 1000D, CANON EOS Rebel T3i, T3, T2i,T1i,XSi,XS, CANON EOS 7D, 60D, 50D, 40D, CANON EOS 5D Mark II, 1D Mark III, 1D Mark IV, 1Ds Mark III, this function can be controlled the flash directly from camera menu. (3) Support camera external flash control flashgun: Canon 580EX II, 430EX II, 320EX, 270EX, Metz AF-48, AF-50, AF-58. (4) Using non compatible with menu setting camera model as below: Canon 10D, 20D, 30D, 5D, 300D, 1D, 1D Mark II, above camera model do not have external flash function setting in camera menu; you can only set the channel and group on transmitter.
Brand:
List Price:
$209.99
Our Price:
$126.90
Total Price:
$126.90
Usually ships in 24 hours
We will ship within 2 business day of receiving cleared payment. Shipment is directly send via registered mail, it usually takes 7-20 business days. Package Included: KING Transmitter x1, KING Receiver x1, PC to 3.5mm studio flash cable x1, PC to 6.35mm studio flash cable x1, USB cable x1, SF-18 Flash Stand Holder x1, Receiver holding mount x1(The holding mount is for studio lamp. It has double tape sticker), Hot shoe protection cover x2, Protector Soft Case x1, English User Manual x1.

PIXEL KING E-TTL II Wireless Flash Trigger for CANON Overview | Sale - Review & Buy at Cheap Price

We will ship within 2 business day of receiving cleared payment. Shipment is directly send via registered mail, it usually takes 7-20 business days. Package Included: KING Transmitter x1, KING Receiver x1, PC to 3.5mm studio flash cable x1, PC to 6.35mm studio flash cable x1, USB cable x1, SF-18 Flash Stand Holder x1, Receiver holding mount x1(The holding mount is for studio lamp. It has double tape sticker), Hot shoe protection cover x2, Protector Soft Case x1, English User Manual x1.

PIXEL KING E-TTL II Wireless Flash Trigger for CANON Specifications | Sale - Review & Buy at Cheap Price

PIXEL KING E-TTL II Wireless Flash Trigger for CANON

PIXEL KING E-TTL II Wireless Flash Trigger for CANON Features

  • The item must use with the "Transmitter" together. The King is a second generation system, with the TTL-control based upon the Knight first released in 2009. Like the Pixel Knight, it does not support the Canon wireless protocol(eg:it can not work as ST-E2 to trigger 430EX flash in remote mode), but works by making the remote flash "think" it is in the camera's hot-shoe. The body is similar to the Pixel Bishop. It uses the 2.4 GHz frequency (unregulated worldwide), and Pixel indicates that has a reach of around 100 meters. Pixel King pair (receiver and transmitter). Photo: Pixel. The King provides 7 selectable channels and 3 different groups. For power, both the TX and RX use two AA-sized batteries. Both the TX and RX have an USB-socket to allow firmware updates. Both the TX and RX have a hot-shoe. The RX hot-shoe is for mounting remote Speedlites. However, the TX hot-shoe is not a TTL pass-through shoe, and can not be used to mount an additional Speedlite. Instead Pixel has hinted that they may later introduce a separate control unit (dubbed "N-ETTL") that can be mounted in the TX hot-shoe and used like the PocketWizard AC3 Zone Controller.
  • May trigger both Canon Speedlites and generic studio strobes. Compatible with Canon E-TTL II for automatic power control. May control up to 3 different groups (7 combinations). May be set to one of 7 different channels. Wireless E-TTL II control from camera position of EX II flash units with a compatible Canon DSLR. When using EX II flash units, you can also adjust the manual power ratio, FEC and zoom head on remote Speedlites with a compatible Canon DSLR. Maximum sync. speed is 1/250 second unless using high-speed sync. mode. High-speed sync., up to 1/8000 second, for EX II flash units connected through the RX hot-shoe. High-speed sync., up to 1/8000 second, for studio strobes connected through the RX pc-socket. USB interface for firmware updates. Can also be used for 5 volts DC power supply. It does not support the Multi stroboscopic mode. For wireless E-TTL II, the flash in the RX hot-shoe must be E-TTL II compatible. Compatible Canon Speedlites are: 580EX II, 430EX II, 320EX, 270EX II. The manual also says that Canon E-TTL II compatible units from third party manufacturers Metz, Sigma, Sunpak and Nissin (no specific models listed) may work. The TX has very sparse controls. To set it up you use the camera's external flash func. setting-menu. The following Canon EOS bodies are listed as compatible: 450D, 500D, 550D, 600D, 40D, 50D, 60D, 7D, 5D II, 1D III, 1D IV, 1Ds III. Older Canon DSLRs does not let you control the flash from the camera menu, and compatibility is limited to selecting channel and group on TX. It will then "dumb down" and operate like a wireless grouping flash trigger such as the Pixel Bishop.
  • Features: (1) Support Canon E-TTL. (2) Up to 3 difference group and 7 combination on the flash transceiver. (3) Support EOS E-TTL II. (4) When using the EOS EX II series flash, you can set difference setting on difference group, available to set 1/1~1/128 flash output, totally 23 difference levels. (5) When using EOS EX II series flash, you can adjust the flash exposure compensation from camera. (6) Support all the shutter speed, sync speed up to 1/8000s;using the PC socket control the studio ight which also support 1/8000s sync speed. (7) Multi control the speedlite or studio light.
  • Function: (1) Support camera menu control flash output power. (2) Support camera menu Settings flash output mode. (3) Support exposure compensation. (4) Support ae lock. (5) Support camera Settings grouping. (6) Support three flash group of output different power flash. (7) Support manual transmitters setting on grouping flash. (8) Support the former shade synchronization, high-speed synchronization. (9) Support high-speed synchronous shadow room lights. (10) Support other brands compatible with flash high-speed synchronization and TTL flash (Metz,SIGMA,Sunpak,Nissin). (11) Support other brands compatible with flash high-speed synchronization and TTL flash (May not support the high-speed synchronization and TTL flash). (12) Support update equipment program. (13) Support a launcher control multiple receptors work. (14) Support flash focusing lights work. (15) Don't support three flash modes such as output different group - TTL and M model E while flash. (16) Don't support multiple stroboscopic. (17) Don't support. After shade synchronous. (18) Don't support Canon wireless flash system. (19) Don't support surrounded exposure. (20) Don't support through the camera menu control EX series flash output model and parameters.
  • (1)King receiver compatible with: Canon EOS 580EX II, 580EX, 430EX II, 430EX, 320EX II, 270EX II, 220EX II Flash, Metz flash, Sigma flash, Sunpak flash, Nissin flash, Studio and outdoor flash. (2)Support external flash control in camera menu: CANON EOS 600D,1100D, 550D, 500D, 450D, 1000D, CANON EOS Rebel T3i, T3, T2i,T1i,XSi,XS, CANON EOS 7D, 60D, 50D, 40D, CANON EOS 5D Mark II, 1D Mark III, 1D Mark IV, 1Ds Mark III, this function can be controlled the flash directly from camera menu. (3) Support camera external flash control flashgun: Canon 580EX II, 430EX II, 320EX, 270EX, Metz AF-48, AF-50, AF-58. (4) Using non compatible with menu setting camera model as below: Canon 10D, 20D, 30D, 5D, 300D, 1D, 1D Mark II, above camera model do not have external flash function setting in camera menu; you can only set the channel and group on transmitter.
List Price : $209.99
Our Price : $126.90
You Save : 40% PIXEL KING E-TTL II Wireless Flash Trigger for CANON We will ship within 2 business day of receiving cleared payment. Shipment is directly send via registered mail, it usually takes 7-20 business days. Package Included: KING Transmitter x1, KING Receiver x1, PC to 3.5mm studio flash cable x1, PC to 6.35mm studio flash cable x1, USB cable x1, SF-18 Flash Stand Holder x1, Receiver holding mount x1(The holding mount is for studio lamp. It has double tape sticker), Hot shoe protection cover x2, Protector Soft Case x1, English User Manual x1.

Reviews More...

Available at Amazon Check Price Now!


*** Product Information and Prices Stored: Mar 01, 2012 06:25:00

Recommend : for Sale . . . samsung galaxy mini accessories professional camcorder financing